Description

3″ 75mm Felt & Compound Glass Polishing Kit

This DIY kit is a very cost effective solution for repairs to fish tanks, car glass, windscreens and all other glass products. Kit contains enough consumables for more than one repair.

Best quality High resistant Rayon fiber ensures high gloss finish on various surfaces such as Minerals, Plastics, glass and coatings.

Resin impregnated to one side to give faster cutting action and quality finish.

Bonded fibres ensure no loose particals to contaminate your surface.

Bonded fibres ensure no loose particals to contaminate your surface.

Using this kit:

Hook and loop backing pad, Glas Polishing Compound and pads are ideal for most scuffs and scratches and removes minor scratches and scuffs from any glass surface.

 Clean the glass surface removing all dirt, grease and residue

Apply the glass polishing compound to the polishing pad or glass surface

Make sure to mark the inside of the glass with a crayon to identify the area you are working on

With the mounted pad in vadiable speed drill or polisher begin working the area required.

Move the pad up and down, left and right in even movements on the work area.

Keep the surface cool and wet to prevent the glass getting too hot. (Very Important!!)

Inspect the work area by wiping off the residue and keep working until the area is satisfactorily polished

On completion wash and store your polishing pad to use again on your next project.