Combination polishing kit 15pce 150mm 6 inch x 2
A superb multi purpose polishing kit for use with an 6″ bench grinder or a variable speed angle grinder. Ideal for use on all metals, alloy wheels, chrome fittings, golf clubs and other metal surfaces including aluminium, brass, stainless steel, copper and most alloys.
This kit has an extensive array of polishing an buffing applications and will give you a brilliant “mirror” finish.
1 x 40 x 40cm Blue Microfibre
1 x 6″ x 2 Section Sisal Polishing Wheel. For cutting.
1 x 6″ x 2 Section Colour stitch v. Can be used for cutting and polishing.
1 x 6″ x 2 Section “B” loose flap Polishing Wheel. For polishing and buffing to a high finish.
1 x 6″ x 2 Section White Stitch v for minimal cutting and high finish.
1 x 6″ x 2 Section Swansdown Polishing Wheel for the ultimate finish.
Compounds
1 x 250g Blue bar = Multishine
The multi-purpose finishing compound. Suitable for all metals. Also performs well as a cutter if used on a hard cotton or sisal buff.
1 x 250g Brown bar = Tripoli
Combined cutting and finishing compound for soft metals only. Suitable for aluminium, brass, copper and zinc diecast. Follow up with a finishing compound if a brighter surface is required.
1 x 250g Grey bar =Fastcut
A fast and economical cutter for hard metals. The rate of metal removal is high, with less emphasis on brightness. To be used on sisal buffs for the removal of scratches and “orange peel” from all metals.
1 x 250g Green bar = green Chrome
For mirror finishing with minimal cut. Best used after a perfect cutting or pre polishing operation. Polishes all metals to high brightness when used on a soft cotton buff.
1 x 250g White bar = SS Finish
For high brightness and good cut. Suitable for all metals, including stainless steel. Recommended for surfaces that are smooth to begin with and are free of deep scratches. Also suitable to be used after MAXICUT. Use a sisal buff for cutting and a cotton buff for bright finishing.
1 x 250g Maxicut Cutting Compound
The fastest cutter for hard metals. The rate of metal removal is high, with little emphasis on brightness. To be used on sisal buffs for the removal of scratches and “orange peel”. May be used on all metals.
250ml Liquid Reflection metal polish is applied with a cloth then wipes with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:
– Brass
– Stainless Steel
– Chrome
– Aluminium & Aluminium Alloys
Liquid Reflection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:
– Stainless & brass boat fittings
– Bullbars, rims and alloy fuel tanks
– Household brass and Stainless cutlery
– Restoring scratched and dull kitchen sinks
It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.
1 x 200gram Blue Sapphire Paste
Blue Sapphire is a metal polish paste, and imparts the same brilliant shine as Liquid Reflection, however it is designed for detailed and intricate surfaces such a motorbike chrome or antiques. After polishing Blue Sapphire dries to a fine powder that is easily brushed or vacuumed off, leaving no residue to adhere to the surface.
Blue sapphire is recommended for Chrome trim over Liquid Reflection as the abrasive is a little finer.
500gram Reflection metal polish paste is applied with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:
– Brass
– Stainless Steel
– Chrome
– Aluminium & Aluminium Alloys
Reflection Paste is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:
– Stainless & brass boat fittings
– Bullbars, rims and alloy fuel tanks
– Household brass and Stainless cutlery
– Restoring scratched and dull kitchen sinks
It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.
Check out our accessories for a selection of adaptors to suit your machine.
