Drill Mounted Motorbike & Engine Polishing Kit 78pce

This drill mounted kit is ideal for your motorcycle polishing project where swingarm, engine blocks, carburettors, chrome, alloys and steels need to be polished up to a “mirror” finish.

The kit also has an extensive array of applications from intricate polishing to general maintenance and upkeep of a good looking bike.

This kit consists of the following:

3 x 40 x 40cm Blue Microfibre

2 x 120mm Blue Microfibre polish applicators

1 x 250g Terracotta bar = Bright Cut DX

A fast cutter for all metals with medium brightness. May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness.

1 x 4″ x 2 Section Sisal Polishing Wheel. For cutting.

1 x 4″ x 2 Section Colour stitch Polishing Wheel. Can be used for cutting and polishing.

1 x 4″ x 2 Section “B” loose flap Polishing Wheel. For polishing and buffing to a high finish.

1 x 4″ x 2 Section White Stitch Polishing Wheel for minimal cutting and high finish.

1 x 4″ x 2 Section Swansdown Polishing Wheel for the ultimate finish.

1 x 2″ x 2 Section Sisal Polishing Wheel. For cutting.

1 x 2″ x 2 Section Colour stitch Polishing Wheel. Can be used for cutting and polishing.

1 x 2″ x 2 Section “B” loose flap Polishing Wheel. For polishing and buffing to a high finish.

1 x 2″ x 2 Section White Stitch Polishing Wheel for minimal cutting and high finish.

1 x 2″ x 2 Section Swansdown Polishing Wheel for the ultimate finish.

40mm Mounted Felt Cylinder Bob.

Mounted Felt Cylinder Bobs and Points with 3mm and 6mm shafts ideal for polishing. Versatile across many mediums, these medium density points will work on most metals, bonded onto 3 and 6mm shafts. These felts tools are a popular and economical method of polishing.

Used in conjunction with compounds and pastes

Felt Point Dia: 10mm shalft: 3mm .

Felt Point Dia: 16mm shalft: 3mm

Felt Point Dia: 20mm shalft: 6mm

Felt Point Dia: 25mm shalft: 6mm

Felt Point Dia: 30mm shalft: 6mm

Felt Point Dia: 40mm shalft: 6mm

Felt Cylinder Dia: 6mm shalft: 3mm

Felt Cylinder Dia: 10mm shalft: 3mm

Felt Cylinder Dia: 16mm shalft: 3mm

Felt Cylinder Dia: 20mm shalft: 3mm

Felt Cylinder Dia: 25mm shalft: 6mm

Felt Cylinder Dia: 30mm shalft: 6mm

Felt Cylinder Dia: 40mm shalft: 6mm

Wet & Dry Abrasive Paper

4 x 240 grade

4 x 320 grade

4 x 400 grade

4 x 600 grade

4 x 800 grade

4 x 1000 grade

4 x 1200 grade

4 x 1500 grade

4 x 2000 grade

60 x 25mm Flap Wheel Kit With 6.35mm Shafts.

Ideal for the pre-polishing preparation of surfaces.

The flexible and long lasting aluminium oxide flaps are secured with a resin bond for extra strength and service life. Their design ensures a consistent finish making them ideally suited for sanding shaped and curved workpieces without the risk of clogging. The wheels have built in arbor shaft for securing in the chuck of most makes of power drills.

Flap wheels are designed to be flexible and conform themselves to the shape being sanded. Flap wheels flex to the different dimensions and shapes of the work piece and sand flat, high and low areas with the same effectiveness. Surfaces include wood, metal, plastics, rubber, stone.

1 x 400 Grade

1 x 800 Grade

1 x 1000 Grade

1 x 1500 Grade

1 x 6mm x 75mm Tapered Mandrel / Mop Taper. Attach it To Your Power Drill For Use With Polishing Mops And Felts From 1″ to 4″ Diameter (25mm-100mm). Specifications:

Spindle Adaptor

Length total =75mm

Length of taper = 25mm

Diameter of shank = 6mm

Taper 3mm -15mm

Compounds

1 x 250g Blue bar = Multishine

The multi-purpose finishing compound. Suitable for all metals. Also performs well as a cutter if used on a hard cotton or sisal buff.

1 x 250g Brown bar = Tripoli

Combined cutting and finishing compound for soft metals only. Suitable for aluminium, brass, copper and zinc diecast. Follow up with a finishing compound if a brighter surface is required.

1 x 250g Grey bar =Fastcut

A fast and economical cutter for hard metals. The rate of metal removal is high, with less emphasis on brightness. To be used on sisal buffs for the removal of scratches and “orange peel” from all metals.

1 x 250g Green bar = green Chrome

For mirror finishing with minimal cut. Best used after a perfect cutting or prepolishing operation. Polishes all metals to high brightness when used on a soft cotton buff.

1 x 250g White bar = SS Finish

For high brightness and good cut. Suitable for all metals, including stainless steel. Recommended for surfaces that are smooth to begin with and are free of deep scratches. Also suitable to be used after MAXICUT. Use a sisal buff for cutting and a cotton buff for bright finishing.

1 x 250g Terracotta bar = Bright Cut DX

A fast cutter for all metals with medium brightness. May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness.

Metal Polishes

1 x 500gram and 250ml Liquid Reflection metal polish in liquid and paste is applied with a cloth then wipes with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:

– Brass

– Steel

– Stainless Steel

– Chrome

– Aluminium & Aluminium Alloys

Liquid Reflection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:
– Stainless & brass boat fittings
– Bullbars, rims and alloy fuel tanks
– Household brass and Stainless cutlery
– Restoring scratched and dull kitchen sinks
It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.

1 x 200gram Blue Sapphire Paste

Blue Sapphire is a metal polish paste, and imparts the same brilliant shine as Liquid Reflection, however it is designed for detailed and intricate surfaces such a motorbike chrome or antiques. After polishing Blue Sapphire dries to a fine powder that is easily brushed or vacuumed off, leaving no residue to adhere to the surface.

Blue sapphire is recommended for Chrome trim over Liquid Reflection as the abrasive is a little finer.