This 150mm kit used with this variable speed polisher/sander rotary type machine to remove limescale build up from your shower screen. Machine speed is between 1500-3000rpm.
DIRECTIONS: Remove dirt and debris from surface prior to applying product. Using a variable speed polisher/sander or orbital buffer type machine, apply a small amount to the polishing pad. PRESS FIRMLY at a machine speed comfortably safe to your ability. Have a spray bottle of water that you apply intermittently to avoid drying. Rinse with water until residue free. Repeat until surface is clean and sparkling. An oscillating buffer or microfiber towel may be used for large areas and hard to clean surfaces.
NOTE: Do not use on surfaces that can be harmed by the use of a mild abrasive. Do not use on plexiglass, soft plastics, or shiny auto paint. Prior to use test product in an inconspicuous area.
Stage One Corrosion is defined as glass with light corrosion, and little or no damage to the glass. Stage Two Corrosion occurs when the deposits are no longer on the surface of the glass, but have started to break down the molecular structure of the glass, leaving an etched or white haze on the glass after the stain has been removed. CRL Bio-Clean Water Stain Remover will not repair glass with Stage Two Corrosion.
An element of trial and error is required. Please be aware that not all screens can be restored due to the nature of limescale, how long it’s taken to buildup and how ingrained it is in your screen.
Included in the kit:
1 x M14 threaded 150mm hook and loop backing pad
3 x 150mm glass polishing pads
1 x 473ml Bio Clean Water Stain Remover
3 x microfiber cloths
