Maroon Satin Non-Woven Airway Wheel – 200mm

Maroon Satin Non-Woven Airway Wheel – 200mm is a purpose-matched wheel for satin preparation and blending.

This abrasive non-woven wheel blends preparation lines, refines hazy surfaces and creates an even satin grain before brighter polishing stages. Its finish is approximately comparable with P320–P400, although the result varies with material, speed, pressure and previous preparation.

Applications and polishing role

Suitable for compatible aluminium, brass, copper, stainless steel, mild steel and other metals when used at the correct stage. Always test plated, delicate or heat-sensitive surfaces first and choose the process according to the starting condition.

Compound and process guidance

• Normally used as an abrasive blending stage rather than charged with bar compound.
• Follow with the appropriate hard, coarse, medium or finishing wheel if a brighter finish is required.
• Maintain a consistent direction and pressure when producing a decorative satin grain.

Specifications

• Diameter: 200mm
• Construction: Single section
• Material: Maroon non-woven abrasive
• Working width: Not specified
• Centre hole: Confirm before ordering
• Primary stage: Satin preparation and blending
• Supply: One wheel

Machine and mounting compatibility

Use only on a compatible polisher, sander, barrel polisher or bench-polishing machine fitted with the correct centre plates, flanges, spindle and guards. Confirm centre size, shaft length, rotation, clearances and maximum permitted wheel speed before use. The 16mm-centre cloth wheels must be retained with suitable Airflow safety flanges.

How to use

1. Isolate the machine and inspect the wheel and all mounting components.
2. Mount securely and run briefly without load while standing clear of the rotation plane.
3. Present the work with light, even pressure and maintain the intended grain direction.
4. Keep the work moving and inspect frequently to control heat and maintain an even result.
5. Stop if vibration, damage or abnormal noise develops; dress cloth wheels when residue builds up.

Safety

Wear appropriate eye and face protection, hearing protection and respiratory protection where required. Secure small workpieces, use close-fitting clothing, tie back hair, remove jewellery and keep snagging items away from the rotating wheel. Follow all machine and wheel instructions.