Cotton Cylinder Polishing Wheel – 50mm, 6mm Mandrel is a drill-mounted shaped wheel for working on internal and irregular surfaces. Its cylindrical profile is suited to bores, channels, tubes and internal walls where a conventional flat wheel cannot make controlled contact. The cotton construction provides a softer face for refining, colouring and final polishing after scratches and cutting marks have been removed.
Polishing role and applications
Use for refinement and final-lustre work on prepared aluminium, brass, copper, stainless steel, mild steel, precious metals and other compatible surfaces. Always select a compound that is appropriate for the material and desired finish.
Shape selection
- Cylinder: straight-sided contact for bores, tubes, channels and internal walls.
- Dome: rounded contact for recesses, curves and irregular contours.
- Goblet: flared contact for bowls, cups and concave forms.
Compound and process guidance
- Pair with a fine colouring or finishing compound; complete abrasive and cutting stages before final polishing.
- Apply compound sparingly and recharge in small amounts.
- Use a separate wheel for each compound and metal group to prevent cross-contamination.
- Test delicate, plated or heat-sensitive surfaces in an inconspicuous area.
Specifications
- Shape: Cylinder
- Diameter: 50mm
- Wheel material: Cotton
- Mandrel: 6mm diameter
- Primary stage: Refining, colouring and final polishing
- Supply: One mounted wheel
Cylinder wheels suit bores, channels and straighter internal walls. Dome wheels follow rounded recesses and irregular contours. Goblet wheels reach into bowls and concave forms. Sisal provides the firmer cutting stage; cotton is for refinement, colouring and final lustre. Confirm the 6mm mandrel fits the drill chuck.
Tool compatibility
The 6mm mandrel is intended for a compatible drill chuck or suitable rotary tool capable of securely accepting a 6mm shank. Confirm the tool manufacturer’s speed guidance, chuck engagement, available clearance and suitability for polishing. Do not use an adaptor or chuck that cannot hold the mandrel concentrically and securely.
How to use
- Switch off and isolate the tool, inspect the wheel and mandrel, and clamp the shank securely in the chuck.
- Run briefly without load and check for concentric rotation, vibration or damage.
- Apply a small amount of the selected compound to the rotating face.
- Use moderate speed, light pressure and continuous movement; allow the shape of the wheel to follow the work without forcing it.
- Control heat, clean or dress the face when loaded, and stop if the mandrel slips or the wheel becomes damaged.
Safety
Wear suitable eye and face protection and respiratory protection where required. Secure the workpiece, keep hands clear of the rotating wheel, tie back hair, remove jewellery and avoid loose clothing or snagging gloves. Never exceed the wheel or tool speed rating.
There are no reviews yet.