Polish Up • Vehicle & Workshop Metal Finishing
Metal Buffing Kit for Alloy Wheels, Bullbars & Ute Trays
A versatile combination kit with 150mm and 100mm polishing wheels for larger open surfaces and smaller components. Shaped drill-mounted cotton mops reach curves and recesses, while four compounds support cutting, refining and bright finishing on hard and soft metals.
Why Choose This Kit?
Two wheel sizes
Use the 150mm wheels for productive polishing on larger areas and the 100mm wheels where control and access matter.
Four wheel types in each size
Sisal, colour-stitch, white-stitch and loose-flap wheels cover cutting through final finishing stages.
Detailed areas covered
Cylinder, dome and goblet cotton mops help polish internal, curved and irregular vehicle components.
Final clean-up included
Vienna Lime, Liquid Reflection, Blue Sapphire and three microfibre cloths support residue removal and hand detailing.
Applications
What’s Included
150mm & 100mm Wheels
- 1 × sisal wheel in each size
- 1 × colour-stitch wheel in each size
- 1 × white-stitch wheel in each size
- 1 × B loose-flap wheel in each size
- 1 × 6mm × 75mm tapered drill mandrel
Detail Mops & Compounds
- 1 × 63mm cylinder cotton mop
- 1 × 80mm dome cotton mop
- 1 × 65mm goblet cotton mop
- 250g Grey Fastcut
- 250g Terracotta Bright Cut DX
- 250g White SS Finish
- 250g Blue Multishine
Clean-Up & Finishing
- Vienna Lime residue-removal powder
- 250ml Liquid Reflection metal polish
- 200g Blue Sapphire polishing paste
- 3 × 400 × 400mm microfibre cloths
Suggested Polishing Sequence
- Clean and prepare the metal, removing coatings and deeper damage before polishing where necessary.
- Select the wheel size that best matches the working area and machine.
- Use sisal with Fastcut or Bright Cut DX for the cutting stage, keeping the wheel moving with controlled pressure.
- Move to a clean stitched wheel with SS Finish or Multishine to refine and brighten.
- Use the shaped cotton mops for curves, recesses and difficult-to-reach areas.
- Remove residue with Vienna Lime, then finish by hand with Liquid Reflection or Blue Sapphire.
Important: Confirm wheel size, bore and safe operating speed are compatible with your machine. Keep every compound on a separate wheel and use appropriate protective equipment.
Specifications
| SKU | PODS-0021 |
| Main wheel sizes | 150mm / 6 inch and 100mm / 4 inch × 2 section |
| Mandrel | 6mm × 75mm tapered drill mandrel |
| Polishing stages | Cutting, refining, bright finishing and detail hand-polishing |
Need help selecting the right setup?
Tell the Polish Up team what vehicle part, metal and machine you have for practical wheel and compound advice.
There are no reviews yet.