A cutting and finishing kit for polishing smooth or pre-polished surfaces of brass, alloy, aluminium and steel metals.
Depending on the condition of the surface of your metal i.e. scratyched with blemishes etc, you may need to prepare the surface with wet and dry sand paper up to 1200-1500 grit. The better the surface is prepared the better the finish.
Testing an area with each wheel and compound will give you a good idea if prep work is required and begining with the least agressive compound is advisable.
This kit does not include polishes or abrasive paper.
Swarts Tool 1200W Variable speed Polisher 180MM
Soft start 1200W Motor
Pads match with hook and loop (180MM)
Ergonomic front handle mounts, left or right handed
Variable 6 speed from 600RPM TO 3000RPM
1 x Durable plastic carrier case
1 Spare set of motor brushes
Spindle lock catch
2M Power lead
1 x Polishing Pad
Comes with a protective storage case.
1 x M14 angle grinder or polishing machine Spindle Adapter. The adaptor screw onto the existing polisher/grinder shaft . IMPORTANT: Please check the shaft size of your machine before you place your order. Specifications:
Length total =85mm
Length of taper = 45mm
Diameter of body = 25mm
Taper 5mm to 25mm
1 x 6″ x 2 section colour stitch Polishing Wheel with 250gram bar of Brown Tripoli cutting compound.
1 x 6″ x 2 section white stitch Polishing Wheel with 250gram bar of Green Chrome finishing compound.
Polishes all metals to high brightness.