125mm Felt & Cerium Oxide Glass, Perspex Polishing Kit
This DIY kit is a very cost effective solution for repairs to fish tanks, car glass, windscreens and all other glass products. Kit contains enough consumables for more than one repair. Can be drill or polisher mounted with M14 threads.
Best quality High resistant Rayon fiber ensures high gloss finish on various surfaces such as Minerals, Plastics, glass and coatings.
Resin impregnated to one side to give faster cutting action and quality finish.
Bonded fibres ensure no loose particals to contaminate your surface.
Bonded fibres ensure no loose particals to contaminate your surface.
Using this kit:
Mix some Cerium oxide powder into water to a form a thin paste like slurry eg. milk-like consistency, in a small spray bottle which can be used to apply to your polishing pad
Clean the glass surface removing all dirt, grease and residue
Apply the polishing compound mixture to the polishing pad or glass surface
Make sure to mark the inside of the glass with the crayon to identify the area you are working on
With the mounted pad in the drill begin working the area required.
Move the pad up and down, left and right in even movements on the work area.
Keep the surface cool and wet to prevent the glass getting too hot. (Very Important!!)
Inspect the work area by wiping off the residue and keep working until the area is satisfactorily polished
On completion wash and store your polishing pads to use again on your next project.
There are no reviews yet.