Polisher with Brass Copper Aluminium & Steels 6" Kit

A cutting and finishing kit for polishing smooth or pre-polished surfaces of brass, alloy, aluminium and steel metals.

Depending on the condition of the surface of your metal i.e. scratyched with blemishes etc, you may need to prepare the surface with wet and dry sand paper up to 1200-1500 grit. The better the surface is prepared the better the finish.

Testing an area with each wheel and compound will give you a good idea if prep work is required and begining with the least agressive compound is advisable.

This kit does not include polishes or abrasive paper.

Comes with:

Swarts Tool 1200W Variable speed Polisher 180MM

Featuers include

Soft start 1200W Motor

Pads match with hook and loop (180MM)

Ergonomic front handle mounts, left or right handed

Variable 6 speed from 600RPM TO 3000RPM

1 x Durable plastic carrier case

1 Spare set of motor brushes

Spindle lock catch

2M Power lead

Trigger lock

1 x Polishing Pad

Comes with a protective storage case.

1 x M14 angle grinder or polishing machine Spindle Adapter. The adaptor screw onto the existing polisher/grinder shaft . IMPORTANT: Please check the shaft size of your machine before you place your order. Specifications:

M14 thread

Length total =85mm

Length of taper = 45mm

Diameter of body = 25mm

Taper 5mm to 25mm

1 x 6″ x 2 section colour stitch Polishing Wheel with 250gram bar of Brown Tripoli cutting compound.

1 x 6″ x 2 section white stitch Polishing Wheel with 250gram bar of Green Chrome finishing compound.

Polishes all metals to high brightness.