Sisal Cutting & Polishing Wheel – 250mm (10″), Two Section is a workshop cutting wheel for removing or reducing grinding marks and preparing metal for subsequent polishing stages. Its natural sisal construction provides a hard, fast-cutting face for first-stage preparation and polishing. The two-section format creates a wider, more supported working face for broader areas and sustained cutting.
Cutting role and suitable applications
This wheel is designed primarily for heavy cutting and pre-polishing rather than final colouring. Use it on compatible steel, stainless steel, aluminium, brass, copper and other suitable non-ferrous metals with a compound chosen for the material. Results depend on the starting surface, compound, machine speed, pressure and operator technique.
Recommended compound and polishing sequence
- Pair with an appropriate coarse cutting or stainless-steel cutting compound for the first stage.
- Apply compound sparingly and recharge in small amounts; excessive compound can load the wheel and reduce control.
- After the cutting stage, move to a stitched or loose-leaf calico wheel with a finer compound for refinement and brightness.
- Dedicate the wheel to one compound and metal group to prevent cross-contamination.
Specifications
- Wheel type: Sisal cutting and polishing wheel
- Diameter: 250mm (10″)
- Construction: Sisal, two section
- Primary stage: Heavy cutting and pre-polishing
- Supply: One wheel
Smaller wheels improve access; larger wheels increase surface speed and coverage on a compatible machine. A single section provides a narrower working face, while two sections add width and support. Treated sisal presents a firmer, more aggressive face. Always confirm centre fit, spindle arrangement, guards and rated speed.
Machine compatibility
Fit only to a compatible bench polisher, converted bench grinder or polishing machine using the correct centre, spindle, tapered adaptor, flanges and retaining system. Check shaft length, rotation, guards, clearance and the machine manufacturer’s maximum permitted wheel diameter and speed. Never exceed the rated speed of the wheel or machine.
How to use
- Isolate the machine and inspect the wheel, spindle and retaining components before mounting.
- Secure the wheel correctly, then run it briefly without load while standing clear of the rotation plane.
- Charge the working face lightly with the selected cutting compound.
- Bring the work to the wheel with controlled pressure and continuous movement; avoid edges that can be caught by the rotation.
- Monitor heat, rake or dress the face when loaded, and stop immediately if vibration, damage or abnormal noise develops.
Safety
Use suitable eye and face protection, hearing protection and respiratory protection where required. Wear close-fitting workshop clothing, secure long hair and remove jewellery. Do not wear loose gloves around rotating equipment. Hold small parts with an appropriate fixture and follow all wheel, compound and machine instructions.
There are no reviews yet.