250mm Centreless Truck Airflow Metal Polishing Kit
Prepare, cut, refine and finish alloy and stainless steel truck components with this complete 250mm centreless Airflow kit. Based on our 250mm Truck Airflow Metal Polishing Kit, this version uses four centreless cloth Airflow wheels, adds a maroon non-woven preparation wheel, and includes the new AAFK-0014 retaining flange and M14 adaptor kit.
Suitable for larger accessible surfaces such as fuel tanks, bullbars, alloy wheels and trims, with smaller accessories for detailed areas. Polishing machine sold separately.
What is included
- 1 × 250mm yellow hard-treated centreless Airflow cutting wheel.
- 1 × 250mm blue coarse-treated centreless Airflow cutting wheel.
- 1 × 250mm orange medium-treated centreless Airflow refining wheel.
- 1 × 250mm natural calico centreless Airflow finishing wheel.
- 1 × 250mm maroon non-woven centreless Airflow wheel for satin preparation and surface blending.
- 1 × AAFK-0014 retaining flange and M14 adaptor kit, shared between the five centreless wheels.
- Grey cutting, green chrome finishing and Hyperfin finishing compounds.
- 250mm × 120-leaf calico final-buff wheel and M14 threaded tapered adaptor.
- 100mm drill-mounted polishing wheels and shaped cylinder, dome and goblet mops, with drill adaptor for smaller areas.
- Vienne Lime for polishing residue removal, Liquid Reflection metal polish and polishing cloths.
Centreless wheels and flange mounting
The five Airflow wheels have an open centre with a metal material-retaining ring and no fitted centre plates. The included AAFK-0014 flanges hold the selected wheel; the M14 adaptor clamps the assembly and attaches it to a compatible polishing machine. Use one wheel at a time and transfer the mounting assembly when changing stages. These wheels do not use the original kit’s 16mm centre-hole mounting arrangement.
Non-woven preparation stage
The maroon abrasive non-woven wheel helps blend preparation lines and establish a consistent satin grain on suitable bare metal. Normally use it without bar compound. Deep scratches require suitable sanding first. Clean away abrasive residue before changing to cloth wheels. Stop at satin if desired, or continue through cutting, refining and finishing for a brighter result.
How to use the kit
- Clean the metal and complete any sanding needed to remove deep defects.
- Use the non-woven wheel where required to blend preparation marks, then clean the workpiece.
- Choose the yellow hard or blue coarse cloth wheel and a cutting compound appropriate for the metal and surface condition.
- Clean between stages, refine with orange and finish with natural calico and a suitable finishing compound.
- Use the separate calico final-buff wheel with Hyperfin where appropriate, remove residue and apply maintenance polish.
Dedicate each cloth wheel to its compound and metal group. Folded Airflow construction encourages air circulation; controlled speed, pressure and movement remain essential to manage heat. Results depend on preparation, metal and technique.
Machine compatibility and fitting
Use only a polishing machine whose manufacturer permits 250mm buffing wheels and this mounting arrangement. Check M14 thread compatibility, engagement, secure clamping, clearance and the permitted speed for every component. An M14 spindle alone does not establish compatibility. Do not assume a fixed-speed angle grinder is suitable.
Isolate the machine before changing wheels. Follow the wheel, adaptor and machine instructions, use suitable eye and face protection and keep loose clothing, hair and jewellery clear of rotating machinery. Machine and sanding abrasives sold separately.












There are no reviews yet.