200mm Centreless Non-Woven Airflow Wheel

200mm Centreless Maroon Non-Woven Airflow Satin Finishing Wheel – Without Centre Plates

$24.75 Inc GST

In stock

200mm centreless maroon non-woven Airflow wheel for satin preparation, blending and an even satin grain. Supplied without centre plates, flanges or M14 adaptor; mounting kit sold separately.

200mm Centreless Maroon Non-Woven Airflow Wheel

Prepare and blend suitable metal surfaces with an open-centre non-woven wheel for satin finishing. Supplied without fitted centre plates or mounting hardware.

Satin preparation and blending

Use the maroon abrasive non-woven material to blend preparation lines and produce an even satin grain on suitable metal surfaces. Test first and maintain a consistent direction with light, even pressure. The finish is approximately comparable with P320–P400; this is a finish guide, not a certified grit rating, and results depend on material, speed, pressure and previous preparation.

Supplied configuration

200mm diameter; one single-section maroon non-woven wheel.
Open centre with metal material-retaining ring as photographed.
Supplied without fitted centre plates, flanges or M14 adaptor.
Working width, open-centre bore and maximum speed must be checked before fitting.

Mounting and compatibility

The AAFK-0014 Safety Flange & M14 Mounting Kit is a compatible mounting accessory for this wheel, sold separately. Flanges hold the wheel in place; the M14 adaptor holds the flanges together and attaches the assembly to a compatible polishing machine.

Confirm machine thread pitch and direction, flange seating, wheel clearance and all component speed limits. Nominal M14 size alone does not establish machine compatibility. Contact Polish Up with your machine model before choosing the assembly.

Process and safe use

Normally use this as an abrasive blending stage rather than charging it with bar compound. For a brighter finish, follow with the appropriate cutting, refining and finishing cloth wheels. Isolate the machine before fitting, inspect the wheel and hardware, and follow the manufacturers’ fitting and speed instructions. Test without load while standing clear. Keep the work moving and stop for vibration, damage or unusual noise. Wear suitable eye, face, hearing and respiratory protection; keep hair, loose clothing and jewellery clear.

Show More Show Less