200mm Centreless Swansdown Airflow High-Finish Wheel – Without Centre Plates

A dedicated final finishing stage

Use after the appropriate cutting, refinement and natural-calico finishing stages. The soft cloth supports a fine colouring compound with minimal cut to develop clarity and reflectivity. It cannot remove deep scratches or correct an incomplete preparation stage, and the final finish depends on the metal, compound and technique.

How it benefits your finish

• Provides a separate final colouring stage after calico finishing.
• Helps develop a brighter, clearer appearance on suitably prepared compatible metal.
• Keeping it dedicated to a fine compound reduces contamination from earlier cutting stages.
• Ventilated folds encourage airflow, while controlled pressure and movement remain essential to manage heat.

Compound and process guidance

Choose a fine colouring or finishing compound suitable for the metal and apply sparingly. Dedicate each wheel to one compound and metal group. Clean the workpiece before final colouring. Suitable applications include compatible aluminium, brass, copper, stainless steel and mild steel; test plated, coated, thin or heat-sensitive parts first.

Mounting and safe use

This centreless wheel requires correctly matched retaining flanges and mounting hardware. AAFK-0014 fitment for this swansdown configuration remains to be verified before sale. Nominal M14 size alone does not establish machine compatibility. Check flange seating, machine thread, engagement, clearance and every component speed limit.

Isolate the machine before fitting. Inspect the wheel and mounting parts, follow the manufacturers’ instructions and test without load while standing clear. Stop for vibration, damage, unusual noise or excessive heat. Wear suitable eye, face, hearing and respiratory protection as required; keep hair, loose clothing and jewellery clear of rotating machinery.

Supplied: one wheel only. Machine, compounds, retaining flanges and adaptor sold separately.