Metal Buffing Mag Bullbar Ute Tray Kit

This combination buffing kit for use with a polishing machine, bench grinder and an electric drill. Used on motor cycles, cars, utes, trucks, this superb alloy polishing kit ideal for use on steel, stainless steel, alloy, aluminium, alloy wheels, even golf clubs and other soft metal surfaces.

This kit has an extensive array of applications with the 4″ polishing wheels. Will give you a brilliant “mirror” finish.

The kit consists of:

Polishing Wheels

1 x 6″ x 2 section sisal Polishing Wheel

1 x 6″ x 2 section colour stitch Polishing Wheel

1 x 6″ x 2 section white stitch Polishing Wheel

1 x 6″ x 2 section B loose flap Polishing Wheel

1 x 4″ x 2 section treated sisal Polishing Wheel

1 x 4″ x 2 section colour stitch Polishing Wheel

1 x 4″ x 2 section white stitch Polishing Wheel

1 x 4″ x 2 section B loose flap Polishing Wheel

1 x 63mm Cylinder Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.

1 x 80mm Dome Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.

1 x 65mm Goblet Polishing Mop High Quality 100% Cotton. For Final Polishing Of Interior And Irregular Surfaces. 6mm Diameter Arbor Fits Most Power Drills.

Spindle Adaptor

6mm x 75mm Tapered Mandrel / Mop Taper.

Vienne Lime – Whiting Powder

Use this to remove grease and compound residues after polishing. Apply it to the microfibre cloth and wipe where you’ve been polishing. Please note that Vienna Lime is not an actual lime powder but a pure form of super fine calcium carbonate (chalk).

Compounds

1 x 250g Grey bar =Fastcut

A fast and economical cutter for hard metals. The rate of metal removal is high, with less emphasis on brightness. To be used on sisal buffs for the removal of scratches and “orange peel” from all metals.

1 x 250g Blue bar = Multishine

The multi-purpose finishing compound. Suitable for all metals. Also performs well as a cutter if used on a hard cotton or sisal buff.

1 x 250g White bar = SS Finish

For high brightness and good cut. Suitable for all metals, including stainless steel. Recommended for surfaces that are smooth to begin with and are free of deep scratches. Also suitable to be used after MAXICUT. Use a sisal buff for cutting and a cotton buff for bright finishing.

1 x 250g Terracotta bar = Bright Cut DX

A fast cutter for all metals with medium brightness. May be used on a sisal buff for cutting, followed on a cotton buff for medium brightness.

Polishing Pastes

250ml Liquid Reflection metal polish is applied with a cloth then wipes with a microfibre cloth, contains soft, fine alumina to gently polish and restore metal surfaces such as:

– Brass
– Stainless Steel
– Chrome
– Aluminium & Aluminium Alloys

Liquid Reflection is ideal for polishing jobs to be done by hand, and imparts an unbeatable shine. Ideal for jobs such as polishing:

– Stainless & brass boat fittings
– Bullbars, rims and alloy fuel tanks
– Household brass and Stainless cutlery
– Restoring scratched and dull kitchen sinks

It is water washable for easy cleanup and can of course be also used with a motorised buffing machine.

1 x 200gram Blue Sapphire Paste

Blue Sapphire is a metal polish paste, and imparts the same brilliant shine as Liquid Reflection, however it is designed for detailed and intricate surfaces such a motorbike chrome or antiques. After polishing Blue Sapphire dries to a fine powder that is easily brushed or vacuumed off, leaving no residue to adhere to the surface.

Blue sapphire is recommended for Chrome trim over Liquid Reflection as the abrasive is a little finer.

3 x 400 x 400mm Microfibre cloth