200mm Centreless Airflow Cutting to Finishing Kit with M14 Adaptor

What is included

• 1 × 200mm yellow hard-treated centreless Airflow wheel — YANW-2012-CL: a firm cutting option for initial polishing of suitably prepared metal.
• 1 × 200mm blue coarse-treated centreless Airflow wheel — BANW-2012-CL: cutting and early refinement.
• 1 × 200mm orange medium-treated centreless Airflow wheel — OANW-2012-CL: intermediate refinement and preparation for finishing.
• 1 × 200mm natural calico centreless Airflow wheel — CANW-2012-CL: final finishing and colouring with an appropriate finishing compound.
• 1 × AAFK-0014 mounting kit: retaining flanges and M14 adaptor, shared between the four wheels.

Each wheel has single-section folded cloth construction and an open centre with a metal cloth-retaining ring. These are centreless wheels without fitted centre plates. Non-woven wheels are not included.

Benefits for your metal polishing work

• A more controlled finish: separate cutting, refining and finishing wheels let you match the process to the metal and the surface condition.
• Brighter presentation: correct preparation and compound selection can reduce fine surface marks and improve clarity and reflectivity on suitable bare metal.
• Useful coverage: the 200mm diameter provides useful coverage on accessible surfaces when used on a machine approved for this wheel size.
• Heat management: the ventilated folds encourage airflow during polishing. Controlled pressure, movement and suitable speed remain essential because the workpiece can still overheat.
• Cleaner stage changes: dedicating each wheel to its compound and metal group helps keep coarse residue away from the finishing stage.
• Reusable mounting hardware: one flange/adaptor assembly serves the included wheels, with individual replacement wheels available separately.
• Restoration potential: suitable metal parts can often be refreshed rather than replaced, depending on their condition and remaining material.

A practical polishing sequence

1. Prepare first. Clean the workpiece and remove coatings or deep scratches with suitable preparation methods. Buffing is not a substitute for the abrasive work needed to level deep defects.
2. Select your starting cut. Choose hard or coarse according to the metal, compound and condition. Every job does not need both cutting wheels.
3. Refine. Clean the workpiece and move to the medium wheel with a compatible refining compound. Check that earlier marks have been removed before proceeding.
4. Finish. Use the natural calico wheel and an appropriate finishing compound. Keep pressure controlled and the workpiece moving.
5. Inspect and care. Remove residue and inspect under good light. Bare steel can reoxidise and may need suitable protective care after polishing.

Suitable applications include compatible aluminium, brass, copper, stainless steel and mild steel, using metal-specific compounds and preparation. Test a small area first, especially on thin, plated, coated or heat-sensitive parts. The final result depends on the material, preparation, compound and technique; a mirror finish is not guaranteed.

Machine compatibility and safe use

Polish Up confirmed pairing: the Shumba 1500W variable-speed polisher, SHVP-1500 is specifically designed to work with this AAFK-0014 adaptor and 200mm wheel combination. Machine sold separately. Follow the instructions and speed limits for the complete wheel and mounting setup.

Use only a polishing machine whose manufacturer permits 200mm buffing wheels and this mounting arrangement. Confirm M14 thread compatibility, correct engagement, secure clamping, clearance and the permitted operating speed for every component. An M14 spindle alone does not establish compatibility. Do not assume an ordinary fixed-speed angle grinder is suitable.

Isolate the machine before fitting or changing wheels. Inspect wheels and hardware, follow the equipment instructions and stop if vibration, damage, excessive heat or abnormal noise occurs. Use suitable eye and face protection and any hearing or respiratory protection required by the task. Keep hair, loose clothing, jewellery and other snagging items clear of rotating machinery.