250mm Airflow Polishing Wheel Set with M14 Adaptor provides a coordinated four-stage, large-diameter Airflow system for progressing from prepared metal through cutting, refinement and final finishing. The ventilated folded single-section construction helps manage heat while the 250mm diameter provides efficient coverage on larger surfaces.
Included polishing stages
- Hard-treated wheel: heavy initial cutting after abrasive preparation.
- Coarse-treated wheel: cutting and first-stage refinement.
- Medium-treated wheel: intermediate refinement and pre-finishing.
- Natural calico fine wheel: final finishing and colouring.
- M14 adaptor: for a compatible M14 machine spindle and the supplied wheel system.
Applications and compound sequence
Use on compatible aluminium, brass, copper, stainless steel, mild steel and other suitable metals. Match a dedicated compound to each wheel and material group. Remove deep scratches with the correct abrasive stage before polishing, and clean the workpiece between stages.
Specifications
- Wheel diameter: 250mm
- Construction: Single section
- Wheel centre: 16mm
- Included wheels: Hard, coarse, medium and fine
- Adaptor: M14 adaptor included
- Process: Cutting through to fine finishing
The larger diameter requires adequate power, shaft length, guard clearance and a safe speed range. Label each wheel for its compound and metal group, then progress from hard or coarse cutting to medium refinement and natural-calico finishing.
Machine and mounting compatibility
The supplied M14 adaptor requires a compatible M14 spindle and correctly fitted wheel retaining hardware. Confirm guards, clearances, shaft engagement and the machine manufacturer’s permitted 250mm wheel speed before use.
How to use
- Prepare the surface to an even abrasive finish.
- Isolate the machine, mount the selected wheel and run briefly without load.
- Apply the matching compound sparingly and polish with controlled pressure and continuous movement.
- Clean the workpiece between stages and avoid cross-contamination.
- Stop if excessive heat, vibration, damage or abnormal noise develops.
Safety
Wear suitable eye and face protection, hearing protection and respiratory protection where required. Secure small parts, use close-fitting clothing, tie back hair, remove jewellery and keep snagging items away from rotating machinery.
There are no reviews yet.